13. Remove the motorcycle from the crate base (cont.).

Removethe 6and 8 mm boltsand right crate shipping brace.

Remove the 6 and 8 mm bolts and left crate shipping brace.

Discard the bolts.

Install and torque the 8 x 22 mm socket bolts securing the footpeg brackets.

Torque: 27 N·m (2.8 kgf·m, 20 Ibf-ft) Lower the side stand and place the motorcycle on a level surface.

Remove the slings.

Clean both sides of all the brake discs using Pro Honda Brake Cleaner or equivalent and a clean shop towel.

14. Install the mirrors.

Thread the mirrors into their mounts and secure them by tightening their lock nuts.

15. Store the Owner's Manual and tool kit.

Insert the ignition key into the seat lock. Turn the key clockwise to release the seat. Pull the seat back and off the motorcycle.

©2005 American Honda Motor Co., Inc. - All Rights Reserved

7